A2810 – BRAKE & OIL PRESSURE SENSOR – analog 0-5V 60Bars – 40cm

This sensor, connected to the brake hydraulic circuit, measures the pressure exerted on the brake disc caliper. 40cm

Installation and Connection

Equipped with a 10×1 mm thread, it’s imperative to provide yourself with additional fittings adapted and specific to your vehicle for an adequate and secure installation.

For electrical connection, simply connect the sensor connector to the purple connector on the Box12 (part no. A1160).

Sensor activation

After installation, activate the sensor directly in your ALFANO7. This step is essential if the ADAPRO software is to recognize and display pressure curves correctly.