EXHAUST GAS TEMPERATURE SENSOR K TYPE- A2151

K type Exhaust Gas temperature sensor

• Max temp: 1.200°C / 2.192°F
• Please Note: This Item needs to be used with the Extension Cable 

EXHAUST Sensor “K” – 40cm “Professional quality”
This K-type thermocouple sensor must be installed on the exhaust. Nut thread: M12, 1.5mm pitch.
Most exhaust manufacturers have provided a threaded hole for quick installation of the A2151 sensor. If this is not the case, you can use our A272A sensor nut, available from our store.
To install it, simply weld this nut to the exhaust, then drill the center hole with a 5 mm diameter drill bit. It is recommended to place the nut approximately 10 cm from the exhaust inlet.
Please note: this sensor must be used with an extension ref. A3401 or a hub ref. A2180.